How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners must follow a set of special steps to install a second ignition key. It requires dealer service using a handheld computer dubbed Tech-2. A new key and transponder need to be bought and then programmed to the car.
It is a good idea to rotate your keys so that one does not get damaged faster than the other. This will keep your keys in good condition.
Replacement Case
The new key fobs aren't like the old Saab keys. They feature electronic components that make them difficult to copy. That has made car theft a lot more difficult than it was just a few years ago. But, it has also made replacing lost keys an incredibly expensive task.
Saab 9-3 owners must have two keys that work. It costs a fortune to replace a lost or damaged key since it requires replacing the CIM module, and changing the locking cylinders. Dealers will typically charge $100-$200 to do this.
There are a few ways to avoid these costly. saab replacement key programming providers will search for the code from an extra key (usually the same one that opens the doors and turns off the ignition) and cut a brand new metal key blade for only a fraction of the dealer's cost. The key, however, must be identical to the original to work correctly in your car.
Follow these steps to replace the case. You will need an flathead screwdriver and patience. Utilizing the screwdriver, slowly pry the plastic apart and remove the emergency key from the case. After the case is open take out all electronic components and place them into your new case. Insert the correct key and badge into the case.
Replacement Battery
The replacement battery for the Saab 9-3 is a cheap part that can be replaced quickly and easily. This YouTube tutorial for DIY Cyclone Cyd shows how to replace the remote key fob battery in only four steps. This tutorial will work with any modern Saab key fob. However, the process could differ slightly.
This button is usually placed next to the Saab logo on the back of the fob. This button is usually located on the back of your fob, close to the Saab Logo. Next take the flathead screwdriver to insert into the small hole of this button. This will allow you to open the fob's case to allow you to replace the battery.
After you have installed the new battery CR1632, you are able to restore your remote key fob. Then, you can program it into your car. The whole process should take more than an hour, if not less. It is a simple process that does not require any special equipment.
The process is a bit more complicated in the event that you lose your key, but it's possible. The dealer has to first verify the VIN of the vehicle and then order an alternative TWICE module, as well as a key blade that has the correct unique code. Then, they'll need to cut the replacement key and then program it with an innovative software tool called MDI.
Replacement Key Fob
The key fob is equipped with batteries that are used to lock and unlock your vehicle. They have a limited life span and will eventually die. It is a common problem with all cars. The good news is you can replace the battery in most key fobs, without having to replace the entire case. You can buy replacement fobs from Amazon that come with all the electronic components already installed, so you can simply open the case and replace the batteries in the original case. It is important to note that you'll need take out the emergency key first. you can do this by inserting the small screwdriver flathead into the slot located in the middle of the case. The case should split when you turn the screwdriver around it.
If you're about to replace the keys ensure that you have a spare as this can reduce the total cost by a significant amount. If you have an additional key, ask the dealer to cut it and program it to your car. This is a lot less expensive than purchasing a new key fob.
If you don't have a spare one, you can add another key to your car, but this will require a lot of research and effort. It costs around a hundred dollars to add a second car key. The computer in the vehicle also has to be programmed. This can be accomplished by a professional, but it is an expensive option for most owners.
Replacement Ignition
The new SAAB 9-3 has an alarm system that is more sophisticated built around a key code. This means that when you lose your sole working key, adding another one can be very expensive since the car has to have a special computer module installed and it must also be specifically programmed to accept a new key. Dealers can charge hundreds of dollars to program an entirely new key, if they are unable to complete the task.
Dealers will charge you top dollar to replace your car's computer (also called the CIM or SAAB twice) in the event that you lose your only working key. We can reprogram the current EEPROM on your car's computer to be prepared for a new key. This will save you more than 50% of the cost you would have to pay the dealer.
If you've been a long time owner of a 03-11 SAAB 9-3, you probably have noticed that the ignition switch isn't the most robust. If the ignition key you have isn't functioning properly, you must think about replacing it. They can become very sticky and the buttons can fall off. It's not so difficult as it may seem to replace the ignition key. With the right tools, it can be accomplished in a matter of minutes.